Furniture board is a high-quality, eco-friendly article of wood. There are two types of furniture board: spliced and full-lamellar. As raw materials for the furniture board is taken the best lumber of oak, beech, ash, pine, larch. Sawed from the board bars (lamella), which are absent defects inherent in the wood, then the humidity of lamella reduce in the drying chambers. If the "lamellas" are spliced to length, then the output is a spliced furniture board, but if the lamellas are selected solid for the entire length of the board, then such a board is called as all-lamellas. Then the lamellas are smeared with glue, "typed" in the width and squeezed in the press (vime). Sustain a few hours, then sanded and trimmed. The board is ready.

Corporal furniture;

Outdoor Furniture;

Countertops;

Sills;

Doors;

Interior decorations

A real find will be a furniture board for those who prefer to do everything "with their own hands".

According to the technology that is used in the assembly of blanks from lumber, distinguish the following types of furniture boards - these are: with a one-piece construction of the leaf; with a spliced construction of the leaf, which, in turn, is divided into products: with an open spike, with a closed cleat; with a single web; with a multilayer web.

Furniture boards are classified by grade, which is determined by the quality condition of the surfaces of the leaf. They differ in their characteristics:

They are evident.The low cost of furniture board has become one of the main reasons for such a high demand for this product. With a relatively uncomplicated manufacturing process, the quality of the product remains very high, while the price is much lower than that of solid wood. It is possible to note the following main benefits:

durability;

strength;

esthetic look;

eco-friendly;

naturalness;

convenience and ease of installation;

A truly beautiful and elegant staircase in a country house or cottage must be made of natural wood. Aleksin Dok" company offers the widest range of stair elements made of pine, beech, oak and larch: steps, treads, struts, platforms, balusters, posts, railings, handrails. With their help it is possible to erect staircase construction of any complexity, which will become a true decoration of a room. Made of natural wood staircase elements have an attractive natural texture, pleasant odor, and are harmless to humans and the environment. They are made in Russia by modern technology using high-quality European equipment.

balusters;

poles;

steps;

treads;

beams;

bowstrings

sites

handrails

Sorts

One of the most popular finishing materials today is euro linings. It is of a higher quality than conventional linings and requires no additional treatment before or after installation. Smoothly sanded front side with a characteristic wood grain looks perfect. Therefore, as a material for finishing in a natural style, it is indispensable. Price euro linings absolutely accessible, thanks to the excellent consumer properties it enjoys high demand, and is applied to furnish the most different premises, both inside, and outside.

living rooms;

terraces and porches;

baths and saunas;

вbathrooms;

arbors;

facades

.

It can be used for both walls and ceilings, creating an original interior design.

They are obvious. First of all, it is high quality, thanks to which euro linings serve for decades. It is possible to note such main advantages:

durability;

strength;

esthetic look;

perfect geometry, complies with the German standard;

environmental friendliness, naturalness;

convenience and ease of installation;

good drapery properties - cladding euro linings allows you to mask any defects in the walls and ceiling.

the presence of a longitudinal shaped notch along the entire back of the board - for ventilation and removal.

countertops;

furniture fronts;

louvered doors;

sawdust;

wood flour;

There are five main varieties: E, A, AB, B, C. They differ in their characteristics:

Spruce;

Pine;

Oak;

Beech;

Larch;